JW5005H

Handheld Video Microscope

Operation Manual

SAFETY SUMMARY

Personnel concerned with the operation of this instrument must thoroughly understand and follow the safety guidelines below. The manufacturer assumes no liability for the operators failure to observe these guidelines.

Warning Laser Radiation Hazard

Operators must always remember that laser radiation at or above 1mW has the potential to cause serious damage to the human eye.

Never look into the open end of an optical fiber where high level of laser radiation may be present.

Warning - Explosive Atmospheres

To avoid explosion, do not operate this instrument in the presence of flammable gases or fumes.

Caution

Operators should not operate this instrument with any of its covers removed, nor should they allow anyone else to do so.

Do not attempt to carry out any unauthorized service to this instrument. Always return the instrument to an authorized service centre for repair to ensure that safety features are maintained.

CONTENTS

Page

Overview 4

Features 5

Description 6

Operation 9

Specifications 11

Overview

Reliability and performance of a fiber optic link largely depends on the quality of interconnects. Contaminated connectors can cause the mating surfaces to separate leading to high insertion loss and back-reflection. Furthermore, some dirt particles can even scratch or dig into the glass causing permanent damage to the end-face of the connector. Therefore, inspection of fiber optic connectors should be performed whenever a connection is to be made.

The JW5005H is a handheld microscope specifically designed for fiber optic connector end face inspection.

Features

l FC/SC/ST/E2000/LC/MU/MPO compatible

l 3.5-inch TFT display

l Up to 250x overall magnification

l 4x digital zoom

l SD card storage up to 8G

l Snapshot, video recording and playback

l PC plug-and-play

Description

1. Main Unit

2. Probe

Operation

1. Main Unit

1.1 Power on/off

Press the Power Button briefly to turn the unit ON or OFF.

1.2 Screen capture and video recording

Press the Snapshot Button for instant screen capture or press the Mode Button and follow the screen menu to record and playback.

1.3 Battery charging

Charging of the internal battery will automatically start as soon as the charger is plugged into the main unit. The charging indicator will light until charging is complete.

2. Probe

2.1 Focus adjustment

Gently rotate the focus adjustment knob to bring the image into focus. Do not overturn the knob or damage to the optical system may occur.

2.2 Adaptor bits

Always install adaptor bits gently and co-axially to avoid damage to the precision mechanism.

2.3 Connection with the main unit

When connecting, insert the end plug to the main units probe socket until a light click is heard. When disconnecting, simply grab and pull the outer ring of the plug.