水泥隔離墩鋼模具兩側位置是有著相同大小的孔洞，這種設計是為了讓隔離墩可以更好的連接在一起，因為不同環境中使用的隔離墩，并不是單獨去進行放置的，需要多個隔離墩組合在一起，可以使用繩子或者是鋼條進行他們之前的連接，然后再去進行他的擺放就可以了。

水泥隔離墩鋼模具每個不同的模具都是有著自己的壽命，如果說長時間的錯誤使用模具，就會導致模具要多次的進行維修，而這樣也會讓水泥隔離墩鋼模具的使用壽命下降，所以說我們每次的加工制作，都要注意好模具的保護。

水泥隔離墩鋼模具就是在灌漿之前，脫模劑的涂刷是不能夠省略的，如果沒有脫模劑可以使用機油或者是食用油來進行代替，這都是可以的，避免了泥漿和鋼模具的直接接觸，大家都知道隔離墩鋼模具在操作的時候，要在干燥的環境中間進行生產，同樣在生產的時候脫模劑也是起到了一個隔絕的作用，因為泥漿是需要使用大量清水來進行攪拌的，長期和鋼模具進行接觸的話，會導致模具出現生銹的風險。

There are holes of the same size on both sides of the steel mold of the cement isolation pier. This design is to better connect the isolation piers together, because the isolation piers used in different environments are not placed separately

, multiple isolation piers need to be combined. You can use ropes or steel bars to connect them before, and then place them.

Each different mold of cement isolation pier steel mold has its own service life. If the mold is used incorrectly for a long time, it will lead to the maintenance of the mold for many times, which will also make the cement isolation pier steel mold

The service life decreases, so we should pay attention to the protection of the mold every time we process and manufacture.

The steel mold of cement isolation pier is before grouting, and the bing of release agent cannot be omitted. If there is no release agent, oil or edible oil can be used to replace it, which can avoid mud and steel mold

As we all know, the isolation pier steel mold should be produced in a dry environment during operation. Similarly, the release agent also plays an isolation role during production, because mud is needed

If a large amount of clean water is used for mixing, long-term contact with the steel mold will lead to the risk of rust.